Titanium mesh support
The open metal geometry provides a substrate for the coating.
Specify a conductive electrode substrate with platinum-coated titanium mesh in the listed size options. The titanium support and platinum surface are intended for electrochemical applications where coating selection and geometry matter. Match the mesh to your cell, electrolyte and operating conditions, with coating loading and detailed compatibility confirmed for the chosen configuration.
Trusted by researchers and innovators worldwide










Product overview
This listing combines a titanium mesh support with a platinum coating for electrochemical component development. The catalogue identifies water electrolysis, fuel cells, cathodic protection and water-treatment applications. Performance depends on the supplied coating and the complete operating environment; no coating loading, certified service life or universal chemical compatibility is established by the available record.

The open metal geometry provides a substrate for the coating.
The platinum layer forms the electrochemically relevant surface.
Choose among the original dimensional options without changing their price mapping.

Evaluate the coated mesh within a compatible electrolysis cell.

Investigate electrode and contact arrangements in an appropriate fuel cell system.

Assess a suitable anode arrangement for a specified protection system.

Investigate treatment reactions with a defined electrolyte and electrode geometry.
| Size | 100x100x1.5 | 200x200x1.5 | 50x50x1.5 |
|---|---|
| Substrate | Titanium mesh |
| Coating | Platinum |
| Weight | N/A |
|---|
The source does not provide a verified loading for this listing. Request the coating specification required by your experiment.
Fit and compatibility depend on dimensions, mounting, electrolyte and electrical conditions. Confirm these against your cell design.
Size: 100x100x1.5, 200x200x1.5, 50x50x1.5. Confirm the exact configuration and any required supporting documentation.
Include the required configuration, quantity and intended application, together with any dimensional drawing or technical documentation needed for selection. Pricing and supply details can then be confirmed for your request.
Related products
In stock
Develop electrode and current-collector assemblies with carbon-coated copper sheet. The copper substrate provides a conductive base, while the carbon surface supports investigation of electrode interfaces. Specify the required sheet and coating dimensions for your project, and confirm the exact material configuration before comparing performance across battery or capacitor experiments.
In stock
Investigate electrochemical carbon-dioxide conversion using a titanium-based cell assembly with documented plate and partition dimensions. The listing describes a research platform for testing reaction conditions and cell components. Match catalysts, membrane, gas handling and analytical equipment to your experiment; product selectivity and conversion performance depend on the complete system and operating method.
In stock
Integrate a flexible conductive fabric into electronic shielding and component-development projects. This material combines a polyester textile with copper and nickel, offering a form that can be cut around a design. Confirm the supplied thickness, resistance, bonding method and tested shielding specification against the frequency range and assembly requirements of your application.
In stock
Specify titanium welding consumables around the ERTi-2 wire and filler-rod listing. The product title identifies 1.2 mm and 2.4 mm diameters, while the wider description covers several grades and formats. Confirm the exact grade, diameter, delivery form and supporting material documentation against your welding procedure before ordering.
In stock
Review a vehicle-oriented hydrogen generator kit with the component scope described in the catalogue. The listing identifies a generator, water tank, separator and control hardware, but does not supply verified vehicle-specific installation evidence. Confirm compatibility, electrical demand, gas handling and applicable requirements before considering any installation or claimed effect on engine performance.
In stock
Specify titanium anode and cathode components for a compatible pool electrolysis or water-treatment assembly. The listing describes MMO-coated electrode options and several manufactured shapes. Confirm the required coating, polarity, active area and connection arrangement against your existing system so the supplied components meet its mechanical and electrochemical requirements.
In stock
Select an MMO-coated titanium mesh anode for a defined electrochemical process. The listed size variants retain their original individual prices and provide a starting point for cell integration. Confirm the actual coating chemistry, active dimensions, electrical connection and electrolyte compatibility before applying general water-treatment or electrolysis descriptions to the selected component.
In stock
Prepare porous electrodes and catalyst supports with nickel foam supplied in the listed sheet sizes. Its interconnected metal structure provides a conductive framework for coating, fluid access and electrochemical investigation. Select the required dimensions and confirm pore grade, surface preparation and electrolyte compatibility before incorporating the material into your experimental system.
In stock
Specify an on-site PEM hydrogen generator around the gas demand of your analytical or research equipment. The listing describes laboratory gas supply and configurable operating arrangements without a complete model schedule. Confirm hydrogen quality, flow, delivery pressure and instrument compatibility, together with the required water supply and installation documentation, before selecting a unit.
In stock
Investigate water electrolysis with a compact PEM hydrogen-generation configuration for laboratory and educational work. The listing provides model-dependent mechanical and electrical ranges, together with purified-water requirements. Match the proposed stack and supporting equipment to your experiment, and obtain a configuration-specific operating specification before using the family ranges to design a system.
In stock
Plan hydrogen-generation experiments with a PEM electrolyser from the listed laboratory and pilot-system family. The catalogue describes several output configurations rather than one fixed machine. Define the required flow, pressure, water supply and downstream use so the proposed stack, controls and supporting equipment can be confirmed for your project before procurement.
In stock
Explore electrochemical transport-layer designs with a platinum-coated titanium PTL in the listed dimensional options. The coated titanium structure is offered for hydrogen and related electrochemical development. Select the required geometry and confirm porosity, coating loading, compression behaviour and interface requirements against the intended cell rather than assuming interchangeability between systems.
In stock
Sale
50% OFF
Monitor hydrogen concentration with a portable detector listed for a 0–1000 ppm measurement range. Its handheld format, LCD and audible and visual indications support inspection planning around hydrogen equipment. Confirm calibration, alarm behaviour, environmental limits and certification for the actual instrument before relying on it within a safety-related monitoring procedure.
In stock
Explore proton-transport and membrane-separator behaviour with a PEM component for electrochemical research. The listing describes fuel-cell and electrolyser use without defining a particular material grade. Specify the cell geometry, thickness, chemistry and conditioning requirements so the proposed membrane can be assessed against the intended experiment and its measurement objectives before selection.
In stock
Specify a proton exchange membrane for a compatible fuel-cell or water-electrolysis assembly. The membrane provides an ion-conducting separator within the electrochemical cell, with the selected grade and dimensions determining integration requirements. Confirm thickness, material identity, active area and conditioning needs before using a general PEM description as a product-level performance specification.
In stock
Consider a round compact PEM electrolyser when planning a space-conscious hydrogen-generation project. The listing describes a modular water-electrolysis system for research and other configured applications. Define your required flow, gas quality, pressure and control interfaces so the actual stack and supporting equipment can be assessed against the intended installation before selection.
In stock
Select a ruthenium-iridium coated titanium anode sheet for a defined electrochemical water-treatment process. The listing combines a titanium substrate with a catalytic coating and several sheet formats. Specify electrolyte composition, active dimensions and operating conditions so coating selection and mechanical integration can be assessed for your particular treatment system.
In stock
Configure a coated titanium mesh anode for electrolysis and related process-development work. The product title identifies a ruthenium-iridium system, while the catalogue describes a wider coating family. Confirm the exact coating, substrate, mesh geometry and electrical duty for your electrolyte before treating general family parameters as limits for the selected electrode.
In stock
Plan salt-water chlorination equipment around a correctly specified titanium electrode component. The catalogue describes substrates, coatings and fabricated shapes for electrochemical water treatment. Confirm whether your project needs an electrode, a cell or a complete controlled system, and match the selected component to the installation, water chemistry and electrical supply.
In stock
Specify thin titanium foil for electronics, materials research and fabrication projects. The listing identifies four thicknesses and describes custom dimensional supply. Select the required thickness, then confirm grade, width, length and surface condition against the intended process, particularly where traceability, tolerances or application-specific qualification are important to the finished component.
In stock
Source titanium plate for fabrication and materials projects in the two thicknesses identified by this listing. Grade 1 is the named product grade, with broader alloy and finish choices requiring separate confirmation. Specify sheet dimensions, surface condition and documentation requirements so the supplied material can be matched to your intended process.
In stock
Specify a titanium mesh anode basket around your electroplating bath and loading requirements. The listing identifies a small round basket alongside wider titanium fabrication options. Confirm basket dimensions, mesh opening, suspension arrangement and material grade for the intended process, with any surface coating or accompanying bag specified as a separate requirement.
In stock
Sale
50% OFF
Specify titanium sputtering targets for thin-film deposition in research and manufacturing equipment. The listing covers circular and rectangular geometries, several thicknesses and custom sizing. Match target dimensions, mounting and material requirements to your cathode, and confirm the supplied purity and documentation before planning a deposition process or repeat material order.
In stock
Discuss on-demand hydrogen and oxygen generation for a defined research or industrial process. This water-electrolysis listing describes an adjustable-output equipment family without a complete model-level operating specification. Specify gas demand, required separation, purity and downstream connections so the proposed configuration and its safety provisions can be assessed before installation.
Get the right equipment and expert support for your application.
