Shop

Explore specialist equipment and components for laboratory research, education and clean energy development.

Fuel cell, hydrogen, electrochemistry, battery, titanium and solar STEM equipment — illustrative collection
44 products
Horizontal cylindrical battery test fixture front view In stock

120A Horizontal Toggle Test Clamp for Cylindrical Batteries

Position cylindrical battery samples with a horizontal toggle test clamp featuring adjustable fixation and separate measurement contacts. The catalogue identifies a 60140 cell format and an 8 mm pole diameter. Because the product title and description state different current ratings, confirm the actual electrical limits and contact geometry before planning high-current tests.

No reviews yet
  • 60140Named cell format
  • Diameter 60 mm × length 140 mmCell size in attribute
  • 8 mmListed pole diameter
Request pricing
Ag/AgCl reference electrode front view with white PTFE body, gold connector, glass tube, ceramic tip, blue protective cap and black ring In stock

Ag/AgCl Reference Electrode

Establish a reference potential in a compatible electrochemical cell with this refillable Ag/AgCl reference electrode. The listing describes a silver/silver-chloride internal element, saturated KCl filling solution and standard pin connection. Confirm the supplied housing, immersion geometry and electrolyte compatibility before pairing the electrode with your potentiostat and chosen measurement method.

No reviews yet
  • Ag/AgClElectrode chemistry
  • 6 mmListed diameter
  • 80–120 mmCatalogue length range
Request pricing
Carbon-coated copper sheet, front featured view, showing matte carbon surface and copper foil margins In stock

Carbon-Coated Copper Sheet

Develop electrode and current-collector assemblies with carbon-coated copper sheet. The copper substrate provides a conductive base, while the carbon surface supports investigation of electrode interfaces. Specify the required sheet and coating dimensions for your project, and confirm the exact material configuration before comparing performance across battery or capacitor experiments.

No reviews yet
  • CopperSubstrate
  • CarbonCoating
  • 0.01–0.1 mmCatalogue substrate thickness
Request pricing
CO2 electrolyser open flow-field plates — front In stock

CO₂ Electrolyser Research Cell

Investigate electrochemical carbon-dioxide conversion using a titanium-based cell assembly with documented plate and partition dimensions. The listing describes a research platform for testing reaction conditions and cell components. Match catalysts, membrane, gas handling and analytical equipment to your experiment; product selectivity and conversion performance depend on the complete system and operating method.

No reviews yet
  • Titanium; exact grade to confirmMaterial
  • 10 × 10 cmEffective plate area
  • 10 × 10 cmEffective partition area
Request pricing
Conductive woven carbon cloth flat rectangular sheet, front view In stock

Conductive Woven Carbon Cloth

Prepare electrode substrates, catalyst supports and current collectors with conductive woven carbon cloth. The listing provides a sheet format and nominal thickness for electrochemical materials work. Confirm surface treatment, wetting behaviour and compatibility with your coating process before selecting the cloth for fuel-cell, electrolysis or other laboratory electrode-development applications.

No reviews yet
  • Woven carbon fibreMaterial
  • 36 × 18 cmListed sheet size
  • 0.34 ± 0.02 mmNominal thickness
Request pricing
Copper foam electrode and catalyst substrate — front featured view In stock

Copper Foam Electrode and Catalyst Substrate

Build porous electrodes and catalyst supports with conductive copper foam in the listed sheet sizes. Its open structure combines a metal framework with space for fluid movement and material deposition. Use the available dimensional options to plan your experiment, and confirm pore specification, chemical compatibility and processing requirements for the intended application.

No reviews yet
  • 100x100x1 | 100x200x1 | 100x300x1Size
  • Copper foamMaterial
  • 0.1–10 mm; grade dependentCatalogue pore range
Price range: £39.00 through £188.00
Copper-nickel conductive shielding fabric roll, partially unrolled with visible cardboard core, front view In stock

Copper-Nickel Conductive Shielding Fabric

Integrate a flexible conductive fabric into electronic shielding and component-development projects. This material combines a polyester textile with copper and nickel, offering a form that can be cut around a design. Confirm the supplied thickness, resistance, bonding method and tested shielding specification against the frequency range and assembly requirements of your application.

No reviews yet
  • Polyester fibre | Copper | NickelComposition
  • 0.015–0.25 mmCatalogue thickness range
  • At least 1090 mm; confirm configurationCatalogue roll width
Request pricing
Custom lithium polymer pouch battery front view with yellow top tape red and black leads and white connector In stock

Custom Lithium Polymer Battery

Develop a lithium polymer battery specification around your device, enclosure and operating profile. This custom-supply listing covers discussions of voltage, capacity and integration requirements rather than a fixed electrical configuration. Provide dimensions, current demand and charging constraints so the proposed battery and protection arrangement can be assessed for the intended application.

No reviews yet
  • Lithium polymerBattery family
  • Project-specific voltage, capacity and dimensionsSupply basis
Request pricing
Front view of a silver crescent-shaped lithium polymer battery with two black insulated leads In stock

Custom Round Lithium Polymer Battery

Design around a round rechargeable lithium polymer battery for compact electronics and sensor projects. This custom-supply listing allows the mechanical and electrical requirements to be discussed together. Provide diameter, thickness, voltage, capacity and expected load so the proposed cell, connection and protection arrangement can be reviewed against your device design.

No reviews yet
  • Lithium polymerBattery family
  • RoundForm factor
  • Custom diameter, thickness and electrical specificationConfiguration
Request pricing
Direct methanol fuel-cell hardware front view In stock Sale Up to 50% OFF

Direct Methanol Fuel Cell Hardware Test Cell

Evaluate membrane electrode assemblies with a direct methanol fuel cell hardware test cell in two listed active-area options. Graphite flow-field plates and gold-plated current collectors support a compact laboratory assembly. Select the required area and confirm membrane, gasket, tubing and operating requirements before connecting the hardware to your fuel-cell test equipment.

No reviews yet
  • 1cm × 1cm | 2cm × 2cmActive Area
  • 1 × 1 cm | 2 × 2 cmStandard active areas
  • GraphiteFlow-field material
Up to 50% OFF
Price range: £1,800.00 through £2,300.00
DIY wooden solar car front view with raised solar panel, wooden frame, motor, wheels and orange drive gear In stock

DIY Wooden Solar Car — STEAM Learning Kit

Explore solar energy through a hands-on wooden car-building activity. This kit introduces learners to assembly, basic circuits and the link between sunlight and motion. Use it for supervised classroom or home projects, with the exact supplied parts, recommended learner age and lighting requirements confirmed before planning a lesson or group activity.

No reviews yet
  • DIY wooden solar carModel type
  • Solar panelEnergy input
  • Solar energy | Basic circuits | Mechanical motionLearning themes
£15.00
Front view of straight silver titanium welding filler rods In stock

ERTi-2 Titanium Welding Wire and Filler Rod

Specify titanium welding consumables around the ERTi-2 wire and filler-rod listing. The product title identifies 1.2 mm and 2.4 mm diameters, while the wider description covers several grades and formats. Confirm the exact grade, diameter, delivery form and supporting material documentation against your welding procedure before ordering.

No reviews yet
  • 1.2 mm | 2.4 mmDiameter
  • ERTi-2Product designation
  • 1.2 mm | 2.4 mmListed diameters
Request pricing

Your selection

Selections are saved in this browser.

    Email quotation request

    SAVEIONS

    Your cart

    Write Special Instructions
    Total:

    Shipping and tax are calculated at checkout.

    Checkout
    THE SAVEIONS CATALOGUE

    What are you looking for?

    Find equipment, components and materials for your next project.

    Explore categories

    Explore the full catalogue